A SERVICE OF

logo

-136-
After the IPsec VPN tunnel of the two peers is established successfully, you can view the connection
information on the VPNIPsecIPsec SA page.
Figure 4-10 List of IPsec SA
4.3.2.2 PPTP VPN Setting
z IP Address Pool
Choose the menu VPNL2TP/PPTPIP Address Pool to load the following page. Enter the
Pool Name and the IP Address Range as the following figure shown. Click the <Add> button to apply.
z L2TP/PPTP Tunnel
Choose the menu VPNL2TP/PPTPL2TP/PPTP Tunnel to load the following page. Check the
box of Enable VPN-to-Internet to allow the PPTP clients to access the local enterprise network and
the Internet. Then continue with the following settings for the PPTP Tunnel.
Settings:
L2TP/PPTP: Enable
Protocol: PPTP
Mode: Server
Username: PPTP
Password: abcdefg