TL-WR1042ND 300Mbps Wireless N Gigabit Router
4.18.6 Reboot
Choose menu “System Tools → Reboot”, and then you can click the Reboot button to reboot
the router via the next screen.
Figure 4-106 Reboot the Router
Some settings of the router will take effect only after rebooting, which include:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Wireless configurations.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router's settings to factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically.
4.18.7 Password
Choose menu “System Tools → Password”, and then you can change the factory default user
name and password of the router in the next screen as shown in Figure 4-107.
Figure 4-107 Password
It is strongly recommended that you should change the factory default user name and password
of the router, because all users who try to access the router's Web-based utility or Quick Setup
will be prompted for the router's default user name and password.
-101-
