TL-WR1042ND 300Mbps Wireless N Gigabit Router
-32-
4.6 Wireless
Figure 4-15 Wireless menu
There are five submenus under the Wireless menu (shown in Figure 4-15): Wireless Settings,
Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click
any of them, and you will be able to configure the corresponding function.
4.6.1 Wireless Settings
Choose menu “Wireless→Wireless Setting”, and then you can configure the basic settings for
the wireless network on this page.
Figure 4-16 Wireless Settings
¾ Wireless Router Radio - The wireless radio of the Router can be enabled or disabled to
allow wireless stations access. If enabled, the wireless stations will be able to access the
Router, otherwise, wireless stations will not be able to access the Router.
¾ Wireless Network Name (also called SSID) - Enter a value of up to 32 characters. The
same name of SSID (Service Set Identification) must be assigned to all wireless devices in
your network. Considering your wireless network security, the default SSID is set to be
