TL-WR340G/TL-WR340GD 54Mbps Wireless Router User Guide
28
¾ Mode - If all of the wireless devices connected with this wireless router can connect in the
same transmission mode(eg. 802.11b), you can choose "Only" mode(eg. 11b only). If you
have some devices that use a different transmission mode, choose the appropriate "Mixed"
mode.
¾ Enable Wireless Router Radio - The wireless radio of this Router can be enabled or
disabled to allow wireless stations access. If enabled, wireless stations will be able to
access the router. Otherwise, wireless stations will not be able to access.
¾ Enable SSID Broadcast - If you select the Enable SSID Broadcast checkbox, the Wireless
Router SSID will broadcast its name (SSID) on the air.
¾ Enable WDS - You can select this to enable WDS, with this function, the Router can bridge
two or more Wlans. If this checkbox is selected, you had better make sure the following
settings are correct.
Figure 4-14 Enable WDS
¾ SSID(to be bridged) - The SSID of the AP your Router is going to connect to as a client. You
can also use the search function to select the SSID to join.
¾ BSSID(to be bridged) - The BSSID of the AP your Router is going to connect to as a client.
You can also use the search function to select the BSSID to join.
¾ Survey - Click this button, you can search the AP which runs in the current channel.
¾ Key type - This option should be chosen according to the AP's security configuration. It is
recommended that the security type is the same as your AP's security type
¾ WEP Index - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It
indicates the index of the WEP key.
¾ Auth Type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It
indicates the authorization type of the Root AP.
¾ Password - If the AP your Router is going to connect needs password, you need to fill the
password in this blank.
