![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/8/9b/89b94d18-0c5f-41d4-b920-40393a5e9652/89b94d18-0c5f-41d4-b920-40393a5e9652-bg3.png)
WHY IT
’
S THE ULTIMATE
The next-generation Slash 4X4 Ultimate represents Ready-To-Race® performance at the
highest level. The Slash 4X4 Ultimate pushes the performance envelope; its new Low-CG
chassis delivers superior handling and maximum corner speed and new 13mm bore GTR
hard-anodized aluminum shocks provide consistent damping and smooth suspension
action lap-after-lap. The result is lightning-fast steering response and smooth, consistent
damping that raises the bar even higher on Slash 4X4 handling and precise control.
The TQi Radio System with Docking Base and Slash 4X4 Ultimate’s factory-installed
telemetry enable real-time data capture and set the standard for tuning ease and versatility.
To truly make this the Ultimate Slash 4X4, the specs are completed with nearly every
factory option available, from aluminum suspension components to a sealed, silicone filled
differential. Simply put, it’s the best of the best.
Front and Rear Sway Bars
6807R: Series 4 4200mAh NiMH Battery
6807L: 2-cell 5000mAh LiPo battery
Replica Tires with
S1 Racing Compound
(Style varies by model)
Optional Included
Center Differential
Traxxas
1100 Klein Road
Plano, Texas 75074
Phone: 972-265-8000
Toll-free 1-888-TRAXXAS
Internet:
Traxxas.com
E-mail:
support@Traxxas.com
Entire contents ©2013 Traxxas. Traxxas, Ready-To-Race, Ready-To-Win, Slash, Velineon, and ProGraphix are trademarks or registered trademarks of
Traxxas. BFGoodrich® Mud Terrain™ T/A® tires are trademarks of BFGoodrich® Tires. Other brand names and marks are the property of their respective
holders and are used only for purposes of identification. No part of this manual may be reproduced or distributed in print or electronic media without
the express written permission of Traxxas. Specifications are subject to change without notice.
Hard-Anodized PTFE
Coated GTR Shocks
Aluminum Rear Hub Carriers
Aluminum C-hubs and Steering Blocks
Aluminum Wheel nuts
FCC Compliance
This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential settings. This product generates, uses and can radiate radio frequency energy, and, if not operated in accordance with the instructions, may cause
harmful interference to radio communications. The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Canada, Industry Canada (IC)
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and This device must accept
any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Traxxas LP Device is below the Industry Canada (IC) radio frequency exposure limits. The antenna for this transmitter must not be co-located with any other transmitters except in accordance with FCC and Industry Canada multi-transmitter
procedures. Co-location means having a separation distance of less than 20 cm between transmitting antennas.