SUMMIT
•
5
tools, supplies, and required equipment
Your model comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
For more information on
batteries, see Use the Right
Batteries on page 11.
SUPPLIED TOOLS AND EQUIPMENT
Universal
wrench
2.0mm “T” wrench 2.5mm “T” wrench
Shock wrench 5mm turnbuckle wrench
Suspension multi-tool
3.0mm “L” wrench
Antenna nut wrench
Body clips Battery Retainers
17mm wheel
wrench
4-way wrench
Warning: Lithium Polymer (LiPo) batteries should not be used with the EVX-2. The EVX-2 electronic speed control is not equipped with low-voltage detection.
4 AA alkaline
batteries
Required Equipment
(sold separately)
NiMH battery charger
(TRX EZ-Peak
™
shown, Part #2930)
*Battery style is subject to change and may vary from images.
Two 7-cell NiMH battery packs with
Traxxas High-Current Connectors*
