A SERVICE OF

logo

975-0082-01-01 33
Xanbus Automatic Generator Start Installation
Connecting the Wiring Harness to the AGS
After all the external connections have been wired to the wiring harness, the
connector on the wiring harness must be plugged into the 20-contact
connector on the AGS.
To connect the wiring harness to the AGS:
With the click-tab on the wiring harness connector on top (away from
the mounting surface), insert the wiring harness connector into the 20-
contact connector on the AGS until the tab clicks into place.
Figure 24
AGS External Connections