Filter
Top Products
18
Technical specifi cations
General
Power Requirements 115V or 230V AC, set by voltage selector switch on rear panel
Power consumption <30W
Dimensions 430mm x 90mm x 280mm
Weight net: 6.2kg
packed: 7.8kg
Video outputs
Composite video 1 x gold plated phono:
1V pk-pk into 75Ω
S-Video 1 x 4-pin mini-DIN:
Y 1V pk-pk in 75Ω, C 0.3V pk-pk into 75Ω
Component video 3 gold plated phono sockets:
Y 1V pk-pk into 75Ω; Pb 0.7V pk-pk into 75Ω; Pr 0.7V pk-pk into 75Ω.
SCART socket with RGB video All 0.7V into 75Ω, composite video 1V into 75Ω, and stereo audio.
Auto switching of TV with aspect ratio control
Progressive scan video Pure Progressive
™
motion adaptive 4-field processing by Silicon Image Corporation
3 gold plated phono sockets:
525P component video. Y 1V pk-pk into 75Ω; Pb 0.7V pk-pk into 75Ω; Pr 0.7V pk-pk into 75Ω
Audio outputs
Analogue audio outputs Two pairs of stereo outputs on gold plated phono sockets
Output level 2.2V rms at 0dB signal
Frequency response 20Hz to 20kHz (+0.1db, –0.5dB)
THD+N <0.005% for 1kHz 0dB signal, measured 22Hz–22kHz, unweighted
S/N 105dB, measured 20Hz–20kHz, unweighted
Digital audio output (IEC958) PCM/Dolby digital/MPEG/DTS on gold plated phono (coaxial) and TOSLINK (optical)
Accessories supplied
CR-314 remote control
2 x AAA batteries
Mains lead
E&OE
Continual improvement policy
Arcam has a policy of continual improvement for its products. This
means that designs and specifications are subject to change without
notice.
NOTE: All specification values are typical unless otherwise stated.