Aiwa TV-C1300U CRT Television User Manual


 
ENGLISH
Connect the antenna cable to the ANTENNA connector on the TV.
If the cable is a round-type 75-ohm coaxial cable, connect it directly to the ANTENNA connector.
If the cable is a flat-type 300-ohm twin-lead cable, connect it to the antenna adaptor(supplied), and connect the adaptor to
the ANTENNA connector.
The antenna adaptor can be taken out from the supplied telescopic antenna.
Connect the AC cord to the AC wall outlet.
The STANDBY indicator on the front lights.
Connecting the antenna
Basic connections
PREPARATION
2
1
4
CONTINUE
To Connect the supplied telescopic antenna
Mount the supplied antenna in the antenna holder.
Extend and adjust the ends of the antenna to get the best
signal reception.
Note
For better reception, especially in outlying areas, or where
ghosting or interference is a problem, use an external roof-
mounted antenna.
Antenna holder
VIDEOAUDIO
OUTPUT
VIDEO
INPUT
ANTENNA
VIDEOAUDIO
OUTPUT
VIDEO
INPUT
ANTENNA
75-ohm
coaxial cable
(not supplied)
300-ohm twin-lead cable
(not supplied)
Antenna adaptor
(supplied)
1
2
To AC outlet