Filter
Top Products
ENGLISH
23
Recording with One-Touch
Recording
You can immediately start recording the current channel for
a specified time with One-Touch Recording.
Before starting
• Insert a cassette with its erasure prevention tab in place.
Make sure the tape is longer than the recording time.
• Select the channel to record and tape speed.
Press wREC/OTR.
The unit starts recording.
•“INDEX” flashes for a few seconds.
• The wREC/OTR button on the unit lights.
Press wREC/OTR repeatedly to set the
recording duration.
Each press changes the recording duration on the
screen in the following way:
After the set amount of time has elapsed, the recording
stops.
1
2
sSTOP
wREC/OTR
wREC/OTR
TIMER REC
indicator
0:30 1:00 1:30 2:00 3:00
normal recording 5:00 4:00
To stop recording
Press s STOP on the remote control or Z STOP/
EJECT on the unit.
To extend the recording duration while
recording
Press w REC/OTR until the new duration you want appears
on the screen.
Tip
To confirm the remaining time of recording, press CALL during
One-Touch Recording.
Notes
• If the power is turned off during One-Touch Recording, the
TV turns off, but the VCR continues to record.
• During One-Touch Recording, when the tape reaches the
end, the TIMER REC indicator on the unit flashes.
Z
STOP/EJECT
CALL