Filter
Top Products
Appendix R, RMD
RMD MANUAL 1.00 R-5
1. Connect one end of a control cable to the REMOTE connector on the CADI, and
connect the other end to the connector labeled “CADI” on the RMD.
Communication between the CADI and the M20(s) happens via the RMD connection to the
first (ID 1/Master) M20 using the MACHINE 1 connector. Do not connect the first
machine directly to the CADI when the RMD is in use.
CADI
M20
M20
M20
M20