Filter
Top Products
Rev 1.1 Page 18
5) Reprogramming the TCP/IP properties of your computer to access the new address, in the current example this could be:
IP Address: 198.168.1.5
Subnet mask: 255.255.255.0
Next, after having restarted or not your computer to make the new IP address operational, open your Internet navigator and type in the
address of the player as follows:
http://198.168..0.10, the main screen will appear.
6.2.5 Reinitialising the IP address
IMPORTANT: If you have made a mistake or you are unable to find the address of the player, you have the option of
programming the player with the factory parameters: TO DO THIS :
1. Connect a standard computer (PC) keyboard to the violet socket miniDin (PS2)
2. Remove the black socket cover from the VGA connector that is next to the RS232 socket.
3. Connect a VGA computer screen to this socket.
4. You will see the command "UTRAM 3 login:" appear
5. Type: ROOT and hit ENTER
6.
You will see the text "password: _" appear
7.
Type: DEBIAN! and hit ENTER
8.
Type: IFCONFIG
9.
The IP address of the player is that which is found after the text "inet addr:"
10.
It is imperative that you type halt and wait until the player displays Power down.