Filter
Top Products
Programming
7
AXB-MIDI MIDI Interface
Programming
Send Commands
Send_Commands control AXB-MIDI signal routing by the Central Controller. The AXB-MIDI
supports the Send_Commands described below.
AXB-MIDI Send_Commands
Command Description
INA
Configure the destination for
the incoming data on IN A
(see the IN A and IN B Signal
Routing table on page 8).
Syntax:
'INA-<value>'
Parameter:
<value> = 0 to 7
Example:
SEND_COMMAND <device>,'INA-5'
Routes incoming IN A data to THRU output and to the Central Controller.
INB
Configure the destination for
the incoming data on MIDI
IN B.(see the IN A and IN B
Signal Routing table on
page 8).
Syntax:
'INB-<value>'
Parameter:
<value> = 0 to 7
Example:
SEND_COMMAND <device>,'INB-7'
Routes incoming IN B data to THRU output, OUT output, and transmit data to
the Central Controller.
RXACLR
Clear characters waiting in
the IN A receive buffer (to be
sent to the Central
Controller, MIDI THRU, or
MIDI OUT).
Syntax:
'RXACLR'
Example:
SEND_COMMAND <device>,'RXACLR'
Clears the IN A receive buffer of all contents.
RXBCLR
Clear characters waiting in
the IN B receive buffer (to be
sent to the Central
Controller, MIDI THRU, or
MIDI OUT).
Syntax:
'RXBCLR'
Example:
SEND_COMMAND <device>,'RXBCLR'
Clears the receive buffer contents for IN B.
RXCLR
Clear all characters waiting in
both receive buffers (to be
sent to the Central
Controller, MIDI THRU, or
MIDI OUT).
Syntax:
'RXCLR'
Example:
SEND_COMMAND <device>,'RXCLR'
Clears the receive buffers or all content for IN A and IN B.
RXON
Enable the ABX-MIDI to send
received characters to the
Central Controller.
Syntax:
'RXON'
This command is automatically sent by the Central Controller when a
CREATE_BUFFER program instruction is executed.
Example:
SEND_COMMAND <device>,'RXON'
Sends received characters from IN A and IN B to the Central Controller.