Apex Digital AD - 1000 DVD Player User Manual


 
16
APEX DIGITAL AD - 1000
Playing Back a Disc
1. Press the POWER button displayed on the front panel.
2. Press the OPEN/CLOSE button.
This will open the disc tray.
Be sure the playback side is faced
down.
3. Place the disc on the disc tray.
4. Press the PLAY button.
After closing the disc tray playback will start.
If the disc you want to playback is a DVD disc, the DVD
video player will start playback automatically. If the disc
you want to playback is a VCD or a CD, press the PLAY
button to start playback.
NOTICE
• Moving the DVD video player during playback may cause damage to the disc as well as the player.
• To open and close the disc tray, you should only use the OPEN/CLOSE button on the remote control or DVD video player.
HOW TO PLAYBACK A DISC.
Basic Playback
(see page 9 -11 for connection details)
How to playback DVD video discs or VIDEO CDs
• Turn on the TV and choose the video input source which is connected to the DVD video player.
How to enjoy the sound from the audio system
• Turn on the audio system and choose the input source that is connected to the DVD video player.
Set the AUDIO OUTPUT to DIGITAL OUTPUT OFF from the SETUP MENU display if you don’t have
the necessary equipment to enjoy Dolby Digital or DTS surround sound.
POWER
Notice
•A disc may be damaged if not correctly
placed on the guides in the disc tray. This
may also cause the DVD video player to
malfunction.
Do not force or place anything other than 5”
DVD’s or CD’s on the disc tray.
Notice
The menu screen will appear automatically
or you may access the menu screen by
pressing the TITLE button.