Filter
Top Products
15
Instruction Manual
FUNCTIONS & FEATURES (continued)
Function Selection Menus
Access
From the Main menu screen, press the “Menu” key until “Picture” is highlighted in
red. Press the left or right arrow keys to access this menu.
Features
This menu allows you to adjust the various picture settings. Use the up & down arrow
keys to move between the various settings, and the left & right arrow keys to adjust
them. When finished, press the “Menu” key to return to the main menu.
TINT
: -31 (more greenish) to +31 (more purplish)
BRIGHTNESS: 0 (dimmest) to 63 (brightest)
CONTRAST: 0 (minimum contrast) to 63 (maximum contrast)
COLOR:
0 (minimum color) to 63 (maximum color)
SHARP: 0 (minimum sharpness) to 63 (maximum sharpness)
Picture Menu
Tuner Menu
Tint
Brightness
Contrast
Color
Sharp
00
32
32
32
32
Picture
Access
Press the “Menu” key until “Tuner” is highlighted in red. Press the
left or right arrow key to access this menu.
Note
: This menu is only accessible while the TV is in Tuner mode.
FEATURES
Use the up & down arrow keys to move between the various settings. When finished,
press the “Menu” key to return to the main menu.
Channel
: This feature allows you to select the channel being displayed. Either use
the left & right arrow keys or the numeric keypad to select the channel.
Add/Erase:
This feature is used to either add or remove the presently selected
channel from the active channel list, which is used by the TV when CH +/ - is
pushed. Use the left & right arrow keys to select ADD or ERASE.
Antenna
: This feature sets the TV tuner to an Air antenna or a Cable antenna.
Please use Air mode when using an over-the-air antenna; use Cable mode for a
cable hookup. Use the left & right arrow keys to select between the two options.
Auto Program:
This feature will automatically add channels to your channel list,
based on the presence of a signal. If a signal is detected, that channel will be added.
If there is no signal detected then the channel will not be added. Use the right arrow
key to start the process; use the left arrow key to stop the process.
Stop
Start
Channel
Add/Erase
Antenna
Auto Program
2
Add
Ai r
Tuner
All Function menus can be accessed by pressing the “Menu” key on the remote control, or using
the “Menu” key on the TV set. When finished, press the “Menu” key until the screen clears.