Apex Digital AT1302, AT 2002, AT2402, AT2702 CRT Television User Manual


 
5
Instruction Manual
FCC Warning
Class B Computing Device
Information to User
This equipment has been tested and found to comply with the limits for a Class B Digital Device pursuant to part 15 of
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. lf this equipment receives interference while off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) lncrease the separation between the equipment and TV.
3) Connect the equipment into an outlet on a circuit different from that to which the TV is connected.
4) Consult the dealer or an experienced radio/TV technician for help and for additional suggestions.
The user may find the following booklet prepared by the Federal Communications Commission helpful:
How
to Identify and Resolve Radio - TV Interference Problems”. This booklet is available from the US Government
Printing Office. Washington, D.C. 20402, Stock No. 004-000-00345-4.
FCC Warning
The user is cautioned that changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
NOTE: In order for an installation of the product to maintain compliance with the limits for a Class B Device, shielded
cables must be used.
SPECIFICATIONS
MODEL
Television System
Channel Coverage
Cable TV Coverage
Channels Preset
Antenna Input
Screen Dimensions
Audio Output
Total Harmonic Distortion
Power Source
Unit Weight
Unit Dimensions
Packaged Dimensions
Power Consumption
AT1302
NTSC-M
VHF 2-13, UHF 14~69
Mid Band (A-8~A-1, A~I);
Super Band (J~W)
Hyper Band (AA~ZZ, AAA, BBB)
Ultra Band (65~94, 100~125)
181
75 ohm (unbalanced)
11.02 x 8.27 in
280 x 210 mm
1W x 2
<7%
120 VAC, 60 Hz
25.3 lbs (11.5 kg)
14.7 x 14.1 x 14.6 in.
373 x 356 x 370 mm
17.8 x 16.8 x 16.8 in
450 x 425 x 425 mm
70W
AT2002
NTSC-M
VHF 2-13, UHF 14~69
Mid Band (A-8~A-1, A~I);
Super Band (J~W)
Hyper Band (AA~ZZ, AAA, BBB)
Ultra Band (65~94, 100~125)
181
75 ohm (unbalanced)
15.98 x 12.01 in.
406 x 305 mm
2W x 2
<7%
120 VAC, 60 Hz
55 lbs (25 kg)
22.3 x 17.8 x 18.8 in
566 x 450 x 477 mm
25.2 x 20.9 x 21.3 in
640 x 531 x 540 mm
90W
AT2402
NTSC-M
VHF 2-13, UHF 14~69
Mid Band (A-8~A-1, A~I);
Super Band (J~W)
Hyper Band (AA~ZZ, AAA, BBB)
Ultra Band (65~94, 100~125)
181
75 ohm (unbalanced)
18.82 x 14.29 in
478 x 305 mm
5W x 2
<7%
120 VAC, 60 Hz
69 lbs. (31.5 kg)
26.0 x 20.6 x 18.1 in
660 x 522 x 458 mm
29.2 x 24.1 x 21.2 in
740 x 610 x 545 mm
125W
AT2702
NTSC-M
VHF 2-13, UHF 14~69
Mid Band (A-8~A-1, A~I);
Super Band (J~W)
Hyper Band (AA~ZZ, AAA, BBB)
Ultra Band (65~94, 100~125)
181
75 ohm (unbalanced)
21.3 x 15.9 in
540 x 405 mm
5W x 2
<7%
120 VAC, 60 Hz
88 lbs. (40 kg)
29.6 x 23.2 x 18.7 in.
750 x 589 x 474 mm
33.6 x 27.3 x 22.9 in.
852 x 692 x 580 mm
135W
BEFORE YOU
BEGIN... (continued)