![](http://pdfasset.owneriq.net/4/da/4daab9c9-31af-429f-8eba-18697a94ebcf/4daab9c9-31af-429f-8eba-18697a94ebcf-bg12.png)
9
VIDEO
16
1
2
Main Menu
Set Password Code
Auto Scan Digital Channels
Manual Channel Set (Add / Delete Channels)
Auto Program
Press MENU on the remote control to display the Main Menu.
It is strongly recommended to set up your personal preferences in
accordance with the menu options. It is presumed your television
antenna is installed. A rooftop antenna is strongly recommended.
The unit will scan and search for all digital
channels that can be received.
To add or delete digital channels that were
found during auto scan.
Note: You can add or delete channels from your Favorite’s
List from this menu. Highlight a channel, then press FAV.
Using arrow buttons, highlight
“Manual Channel Set”. A menu of available
channels will display.
Press to select a channel to be viewable
or not viewable. Press OK to confirm the
change.
For access to Parental Controls, enter your
4 digit password. Factory default code:
0000
The Main Menu display is for accessing
and setting up preferences for the DT150.
When Auto Program is highlighted, press
OK to begin the auto scan program search.
Note: Auto Program search for digital channels
in your local area may take several minutes
to complete.
Main Menu
Auto Program
Manual Channel Set
Password
Parental Controls
Closed Captions
Language
Sleep Timer
Smart Antenna
Time Zone
TV Aspect Ratio
Reset Default Settings
To Move To Select To Exit
OK EXIT
English
4 Hours
Pacific
4:3
Manual Channel Set Menu
To Move To Select To Exit
OK EXIT
Ch 2-1
Ch 4-1
Ch 4-2
Ch 4-4
Ch 5-1
Ch 5-5
Ch 7-1
Ch 7-2
Ch 7-3
Ch 9-1
KCBS-DT
NBC-4LA
WX-PLUS
RawNews
KTLA-DT
TheTube
KABC-DT
KABC-SD
KABC-WN
KCAL-DT
Viewable
Viewable
Not Viewable
Viewable
Viewable
Viewable
Viewable
Viewable
Viewable
Viewable
Fav
Fav
Fav
Auto Program Menu
Auto Scan
Progress (%)
Scanning
25
Enter Old Password
Connection to TV
yellow
To TV Video Input
ANTENNA IN
TV OUT
S-VIDEO
L
AUDIO R
CH 3
CH 3/4 &
Analog Pass-Through
CH 4
SMART
ANTENNA
Composite (using supplied AV cables)
S Video
Connect the supplied video (yellow) and
audio (red & white) cables.
To view, cycle through your television inputs
(Video 1, 2, etc) to select the source that the
DT250 is connected to.
For better quality, connect with an optional
S-Video cable (if your TV has this input).
Do not connect the yellow video cable when
installing the S-Video cable.
To view, cycle through your television inputs
(Video 1, 2, etc) to select the source that the
DT250 is connected to.
(using supplied audio cables)
Note: TV reception is dependent on local
terrain, distance from the local area
antenna tower and strength of your antenna.
To TV Audio R, L Input
white red
L
AUDIO R
CH 3
CH 3/4 &
Analog Pass-Through
CH 4
S-VIDEO
ANTENNA IN
TV OUT
VIDEO
SMART
ANTENNA
To TV Audio R, L Input
white red
To S-Video Input on TV
17
EN