Filter
Top Products
17
TV FUNCTIONS
Tuning in
After you have finished connecting your unit, you can preform Auto Program to set up your channels.
First press the button to turn on the TV.
1. To perform Auto Program
1) Press the MENU button.
2) Press the CH-/ + buttons to highight “Tuner”.
3) Press the VOL-/ + buttons to call up the “ Tuner “ sub-menu.
4) Press the CH-/ + buttons again to highlight “ Auto Program “. Press the
VOL+ button to search fro channels.
During auto program, press the VOL- button to stop searching.
After performing Auto Program, press the MENU button to exit.
Notes:
1 After auto program, there may be some repeated channels or inferior signal received. In thes case,press
any of the VOL- / + , Channel Number buttons to select one of the channels. Then set Add/ Erase to Erase
so that pressing the CH - / + buttons can not caII up the channeIs. To resume the channeIs, set
Add/Erase to Add in the way mentioned above.
2 When Antenna is set to the Air mode, the TV wiII auto search from channel number 2 to 69; when set to the
Cable mode, it wilI auto search from 1 to 125 (of which 2 -13 channeIs in the Air and CabIe modes are the
same.)
2.Channel selection
Press the CH-/ + buttons to highlight “ Channel” in the Tuner menu, and press any of the VOL- / + ,Channel
Number buttons to select channel numbers.
Stop Start
Channel
Add/Erase
Antenna
Auto Program
2
Add
Ai r
Tuner
General Operation
1.To control volume
Press the VOL -/ + buttons to decrease or increase the volume.
1)
2)
Volume 20
Mute
While adjusting volume, hold down the F button, then press the
VOL-/+ buttons to decrease or increase volume by 4 levels.
During normal play, press the MUTE button to eliminate the
sound until you press the VOL + or MUTE button again.
MUTE
F
VOL-
VOL+