Filter
Top Products
15
USER MANUAL - version 3
“TV Receiver”: select the type of tuner that you want to control with the IR Emitter
(“VCR”, “Cable/DSL box”, “Satellite Receiver”, “DVD Recorder” or “Digital TV”).
“Receiver brand”: choose the brand of your tuner. You can use the buttons on
the remote control to scroll the list faster.
Select the “Test power Off code” button. Make sure that your tuner is on. Your
ARCHOS device will then try to turn your tuner off. After a few seconds, your
ARCHOS will ask you if the device responded correctly:
If your tuner turned off, select “Yes”, and move on to the next section.
If your tuner did not turn off, select “No, try next code”. Your device will try turning
the tuner off again, using a different code. Repeat this operation until the ARCHOS
manages to turn the tuner off.
If none of the codes work, check that the DVR Station is positioned in a way that allows the infrared signal to
reach your tuner’s receiver. Note: In some rare cases the ON/OFF functionality may not work.
2
nd
Test: changing channels on your tuner
After you select “Yes” at the end of the 1
st
test, the following screen appears. It allows you
to correctly set the parameters so that the DVR Station can change channels on your tuner
(for a scheduled recording).
For the “Channel” parameter, select the highest channel that is currently memorized
on your tuner.
2.
3.
4.
1.