Filter
Top Products
128-6163
14 of 24
ERASE/WRITE Button (4)
This button is used to add or erase channels from memory. To
erase a channel, use the keypad buttons to select the desired
channel and press the ERASE/WRITE button; ERASED will
appear on the screen. To add a channel to memory, use the
keypad buttons to select the desired channel and press the
ERASE/WRITE button; ADD will appear on the screen.
Channel Up ( CH ) Button (5)
Pressing this button with skip mode off will access all channels
in the up direction; with skip mode on, only those channels
stored in memory can be accessed.
Channel Down ( CH ) Button (6)
Pressing this button with skip mode off will access all channels
in the down direction; with skip mode on, only those channels
stored in memory can be accessed.
AUTO MEMORY Button (7)
When this button is pressed, the tuner will scan all strong
broadcast signals and store them in memory.
MAIN POWER Button (8)
When pressed, this button alternately turns the AVP-7380 on
and off; the annunciator says “Power On” or “Power Off”.
REW Button (9)
If this button is pressed in the PLAYBACK mode, the VCP enters
the reverse picture search mode. If pressed in STOP mode, the
annunciator says “Rewind” and the tape will rewind at high speed.
F FWD Button (10)
When this button is pressed during playback, the VCP enters
the forward picture search mode. When pressed in stop mode,
the annunciator says “Fast Forward” and the tape will fast
forward at high speed.
14