Audiovox AVP7380 VCR User Manual


 
128-6163
17 of 24
17
the built-in voice annunciator to the Speaker. Use the LOW/
MED/HI switch to adjust the volume.
6. Control the Unit Remotely:
Plug REMIR into this jack and extend the sensor of the REMIR
to where the driver can control the unit conveniently with the
Remote Control pointing to the sensor.
7. Secure the VCP to the vehicle using the supplied mounting
brackets to ensure safe operation.
J. Basic Operation
1. POWER
Plug in the unit, and the power lamp will turn on. Press the
POWER key to switch on or off the power. The lamp will be
brighter when the unit is on.
2. TV/VIDEO
Press the TV/VIDEO key on the remote control to select the
tuner (TV) mode, the VCP mode (VIDEO 1) and the rear AV
INPUT mode (VIDEO 2) in turn. When the power turns on,
the unit goes to the mode with last memory.
NOTE: Plugging the front-mounted AV inputs overides all
other inputs.
3. CASSETTE LOADING/UNLOADING
a. Loading the Cassette:
1) Gently push the cassette into the cassette
compartment, making sure the cassette arrow is on
top.
NOTE:The cassette cannot be inserted upside
down.
2) If VCP power is off when the cassette is inserted,
power will turn on as long as the VCP is connected
to the power source, and the cassette will begin to
play.