Filter
Top Products
15
System Connections
NOTE: Before plugging the power cord into an AC outlet, make sure that all the connections have been
made as described below.
Power Supply Connection
Connect the AC power adapter to the side of the DVD player in the jack marked “DC 9V IN”. Plug the two-
prong end of the power cord to an AC100-240 outlet. If you have difficulty inserting the plug, turn it over
and re-insert it. If the DVD Player will not be used for a long time, disconnect the plug from the outlet.
Connecting To a TV (Refer Figure 1)
Audio/Video connections
Always ensure that the DVD player, TV and any other electrical equipment to be connected to the DVD
player is switched OFF.
Use the supplied Audio/Video adapter to connect the DVD player to a television or audio amplifier.
Connect the audio/video adapter cable from the DVD player to the audio/video inputs of the TV. Switch
the AV IN/OUT switch to OUT.
Note:
This requires an additional A/V cable not supplied.
Connecting to an Amplifier (Refer Figure 2)
The DVD player can also be connected to an audio amplifier. Please refer to the equipment’s manual
before connecting.Switch the AV IN/OUT switch to OUT.
Optional
AV Switch turn to OUT
AUDIO IN/OUT
VIDEO IN/OUT
AV
IN
OUT
VIDEO
IN/OUT
AUDIO
IN/OUT
AMPLIFIER
AUDIO L AUDIO R
Optional
AV Switch turn to OUT
AUDIO IN/OUT
VIDEO IN/OUT
AV
IN
OUT
VIDEO
IN/OUT
AUDIO
IN/OUT
VIDEO IN AUDIO L AUDIO R
Figure1 Figure2
Optional
VIDEO IN AUDIO L AUDIO R
AV Switch turn to OUT
AUDIO IN/OUT
VIDEO IN/OUT
AV
IN
OUT
VIDEO
IN/OUT
AUDIO
IN/OUT
AMPLIFIER
AUDIO L AUDIO R
AV Adapter Cable