Filter
Top Products
Revision C
3/2001
11. POWER BUTTON
This button is used to turn the VCP on and off.
12. “REW” REWIND BUTTON
If this button is pushed while the tape is stopped, the tape will rewind. If this button is pushed while
the tape is playing, the VCP will go into rewind search mode. For more information consult the
Audiovox VCP owner’s manual.
13. PLAY BUTTON
Press this button to activate play mode while a tape is loaded into the VCP. This button may also be
used to disengage search and pause modes. For more information, consult the VCP owner’s manual.
14. “FFWD” FAST FORWARD BUTTON
If this button is pushed while the tape is stopped, tape will fast forward. If this button is pressed
while the tape is playing, the VCP will go into fast forward search mode. For more information on the
search feature of the VCP, consult the VCP owner’s manual.
15. REPLAY BUTTON
Pressing this button will rewind the tape and immediately begin playback when the tape is fully
rewound.
16. STOP BUTTON
Press this button to stop the tape.
CHANNEL TUNING SETUP
In order to easily access all available channels, it may be necessary to perform channel auto-
programming whenever the vehicle’s geographic location has changed, i.e. city to city, weak signal area.
1. Press the AUTO MEMORY button on the remote control unit or the AUTO PROGRAM button on the
flip down video unit. You will see the TV cycle through all it’s channels. The built-in microprocessor
will automatically note each channel that is actively broadcasting in your area.
2. (A) To tune only strong clear channels with the CHANNEL UP/DOWN buttons, press the
SKIP/SEARCH button on the Remote Control Unit until “SKIP MODE ON” is displayed on the bottom
of the screen. The TV will now tune only to strong active channels when the UP or DOWN buttons
are used on the monitor or the remote control.