-
14
12. DD BUTTO
Press this button to add the selected channel to memory.
Initial Setup
A N (ADD)
OPERATION
: This unit defaults to cable TV mod When the unit is first powered on, it will
detect the cable system and auto-program the TV uner to the available stations. Please wait
while the unit auto-programs before attempting t perate the unit. During this time the unit
will not respond to any commands. The unit will respond normally once the cable mode and
channel search mode is concluded.
CHANNEL TUNING SET UP
In addition to normal broadcast reception of VHF and UHF channels, if you are Cable TV subscriber,
yo ing many unscrambled Cable channels without the use of a converter
box. W
(STD, HRC, or IRC) it receives CH1-CH125. NOTE: Most cable companies broadcast in STD Mode
A nit will go into a cable mode search (HRC, IRC, STD) and
channe ill not respond to any
co pond normally once the cable mode and channel search mode is
conclu
POSIT
Press the screen lock button and pivot the screen forward until a comfortable viewing angle is reached.
The sc he screen beyond its rotational limit.
The VE705 is now ready for use.
Pressin ember to turn
th creen to the closed position when not in use.
SE
NOT E705 turned off.
the minutes will flash.
2)
3) Press the SEEK button to toggle between the hour and minutes.
ton to set the hour. (Check AM/PM indicator)
5
e.
t
o o
ur new TV is capable of receiv
hen set to broadcast (AIR) TV, it receives CH2-CH69. When set to one of the CATV modes
fter a power interruption, the u
l search mode automatically. During this time the unit w
mmands. The unit will res
ded.
IONING THE SCREEN
reen may also be rotated from side to side. Do not force t
g the PWR button on the unit or the remote will turn the system on or off. Rem
e unit off and pivot the s
TTING THE TIME
E: All settings (except setting the presets) are performed with the V
1) Press the SET button and
Use the CH up/down button to set the minutes.
4) Use the CH up/down but
) Press the Power button to return to the time display.