Filter
Top Products
-
15
ETTING and ACTIVATING ALARM
NOTE: The VE705 must be turned “OFF” when performing the following procedure.
e proper setting.
3) Press the SEEK buttons to toggle between the hours and minutes.
n. The alarm is now set and activated. Once the alarm is set it will
2) Press the P3 button once. The set time will disappear from the Display Window and a series of
forming step 1) of the ACTIVATING ALARM procedure.
ctivated” mode to hear tones.
5) When the alarm sounds, press the set button to turn it off.
S
Cable configuration mode.
TD/IRC/HRC).
S
1) Press the SET button twice to enter the alarm mode, press the P3 button to toggle between
the active and deactivated mode.
NOTE: If a series of dashes appear (--: --), the Alarm is DEACTIVATED.
2) Press the CH up/down buttons to set the desired hour/minute. When setting the alarm, check
the AM/PM indicator to assure th
4) Press the Power butto
sound each day at the same time as long as it is activated.
DEACTIVATING ALARM
1) Press the SET button twice to enter the alarm mode.
dashes (--: --) will appear, Alarm DEACTIVATED mode.
3) Press the Power button. The alarm is now deactivated.
NOTE: The set time will be stored in memory and can be reactivated whenever desired by
per
SETTING THE ALARM TONES
1) Press the SET button twice (power off).
2) Press the P4 button once to hear the alarm tone.
NOTE: Alarm must be in the “A
3) Each time CH UP/DOWN button(s) is pressed it will select a different alarm tone.
4) Press the Power button to confirm the selected tone.
ETTING THE CABLE TV MODE
1) Press the SET button three times to enter the TV/
2) CABLE or AIR will appear on the display.
3) Press the SEEK button to select Cable mode.
4) Press the CH UP/DOWN button(s) to select the desired cable mode (S
5) When the desired mode is reached, press the Power button to confirm.