Filter
Top Products
11
System cable
AVC System (rear view)
AC cord
Display (rear view)
Setting the System
After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
Preparation
Connecting the system cable and the AC cord to the Display
1
2
3
Removing the terminal cover
Connecting the system cable and the AC cord to the AVC System
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Press down the four
upper hooks to remove
the cover toward you.
Press the two hooks
toward the center of the
Display and remove the
cover toward you.
AC cord
(GRAY)**
Connect the plug firmly until the
hooks on both sides click.
(WHITE)*
Connect the plug into the terminal
and secure it by tightening the
thumb screws.
(BLACK)
Connect the plug
completely.
(BLACK) (WHITE)* (GRAY)**
System cable
NOTE
* When you unplug the WHITE system cable, make sure you unscrew the screws thoroughly before unpluging the
cable.
**When you unplug the GRAY system cable, press the hooks on both sides of the cable inward as you unplug the cable
gently.
LC-45GX6U(E)-001-019 04.7.8, 8:41 AM11