AVC Technology LC-45GX6U DVD VCR Combo User Manual


 
97
Appendix
PC compatibility chart
Apple and Macintosh are registered trademarks
of Apple Computer, Inc.
DDC is a registered trademark of Video Electronics
Standards Association.
Power Management is a registered trademark of
Sun Microsystems, Inc.
VGA and XGA are registered trademarks of
International Business Machines Co., Inc.
PC/MAC Resolution Horizontal Frequency
Vertical Frequency
VESA Standard
PC
31.5 kHz
37.9 kHz
31.5 kHz
37.9 kHz
31.5 kHz
37.9 kHz
37.5 kHz
43.3 kHz
31.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
53.7 kHz
48.4 kHz
56.5 kHz
60.0 kHz
68.7 kHz
45.0 kHz
48.1 kHz
64.0 kHz
34.9 kHz
49.7 kHz
60.2 kHz
640 x 400
720 x 400
VGA
640 x 480
WVGA 848 x 480
SVGA
800 x 600
1024 x 768XGA
1280 x 720
WXGA
1280 x 768
SXGA
1280 x 1024
VGA
640 x 480
MAC13"
XGA
1024 x 768
MAC19"
SVGA
832 x 624
MAC16"
60 Hz
85 Hz
60 Hz
85 Hz
60 Hz
72 Hz
75 Hz
85 Hz
60 Hz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
60 Hz
70 Hz
75 Hz
85 Hz
60 Hz
60 Hz
60 Hz
67 Hz
75 Hz
75 Hz
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Attention about Digital broadcasting
The error message about reception of broadcast
The example of an error message
displayed on a screen
Error code Possible Solution
Failed to receive broadcast.
E202
No broadcast now.
E203
Check the antenna cable. Check that the antenna is correctly
setup.
Check the broadcast time in the program guide.
The cautions about i.LINK
Possible Solution
Record/Playback may fail on the selected model.
• Wrong connection or no i.LINK connection was
found. Refer to Operation Manual on connection.
Displayed when you have selected a device that is not
compatible with the System, or that does not have DTLA copy
protection technology installed.
Displayed when a problem is experienced with a connection
using i.LINK cable. Check the connection, and re-connect the
cable if necessary.
Cautions sentence
The selected model is disable to Rec/PLAY. Check
that no other model is used.
Displayed when the device you have selected is already being
used by another i.LINK connected device. To operate the
selected device from the System, you will first have to override
control from the other device.
LC-45GX6U(E)-096-106 04.7.8, 8:59 AM97