Filter
Top Products
Source Set Up
8-1
5975348 BARCOVISION 8200 210497
8
SOURCE SET UP
Input selection
Use the numeric keys on the RCU or use the local key pad to select the corresponding input
slot.
The source settings has to be installed for each source when these sources are displayed for
the first time.
Installation of the settings for a input source.
Start up the adjustment mode by pressing ENTER. The main menu will be displayed.
Push the joy stick key forward or backward to highlight File service.
ENTER selects the highlighted item and continues to the next step. EXIT returns always to the
previous step.
* Select the LOAD function to install the correct file. Only the files which can be used for this
source will be shown. (See appendix A for a list of the standard available files).
File annotation :
xxxxxxxx.xxx (Sx, xxxXxxxi)
MAIN MENU
832c
Picture Control
System Settings
File service
Service Mode
I or blank : i = interlaced, blank = not interlaced
xxxXxxx : active pixel rating
Sx : source number
xxx : file extension, first character is C (for custom made files) or S (for standard
files).
The second and third character is used for a following number (=file index)
file index for custom files : 00 to 63.
xxxxxxxx : base name, 8 characters.
The projector leaves the factory with different custom files installed.
Push the control disk up or down to select LOAD and press
ENTER to display the Load
menu.
LOAD FILE
pal .s1 (s1. 675x278i)
pal .c50 (s1. 675x278i)
secam .s3 (s3. 675x278i)
849
pal .c50 (s1. 675x278i)
Search pattern : [Fit]
FILE SERVICE
847
Load
Edit
Rename
Copy
Move
Delete
Options
The Load menu displays the corresponding files depending on the installed search pattern.
This search pattern can be "Fit" or "All". To change the search pattern, push the control disk
to the right to select "search pattern" and press ENTER to change the annotation between
brackets.
"All" : all available files will be displayed.
"Fit" : only the best fitting files will be displayed (with a distinction of ± 2 lines and line duration
distinction of ± 300 ns)