Filter
Top Products
Source Numbers 90 - 99
D-1
5975348 BARCOVISION 8200 210497
D
SOURCE NUMBERS 90 - 99
Source numbers 90 - 99
These source numbers do not correspond to physical inputs. They can only be used when the projector is equipped
with a RCVDS 05 or VS05. An additional adjustment file can be created for these source numbers. This file can
contain different settings. The relationship between sources 0 - 9 and 90 - 99 is shown in the diagram below.
source input 1
source number 1
source number 91
file A
file A'
source input 2
source number 2
source number 92
file B
file B'
source input 3
source number 3
source number 93
file C
file C'
source input 9
source number 9
source number 99
file I
file I'
Follow the steps below to create a second file for sources 0 to 9 :
1. Select the source between 0 and 9.
2. Select the corresponding source number between 90 and 99 with the digit keys on the RCU.
3. Enter the adjustment mode and load a corresponding file. Edit this file if necessary.
4. Save the file and exit the adjustment mode.