Filter
Top Products
7. Image Menu
• The white balance happens only on Green
Adjust until bright spots appear in the image
Image 7-34
• The black balance happens on the three colors
The PR and PB connector have to be removed from the input
Adjust until noise appears in the image
Image 7-35
The input balance settings are stored in the image file, each source has its own input balance.
7.9 AGC on Video
AGC
Automatic Gain Control: allows an automatic amplitude (gain) control of the incoming video signal
AGC is only for Video signals
Enabling/disabling the AGC
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Im age menu
4. Use ↑ or ↓ to select AGC on Video
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable or disable the AGC
7. Press ENTER
A white bullet shows the active setting (ima
ge 7-36)
74
R5976367 BARCOIQ GRAPHICS 500 01/02/2007