Filter
Top Products
10. Lamp Menu
Image 10-9
10.5 Reset runtime
When to reset the lamp runtime ?
The lamp runtime should only be reset when placing a new lamp.
WARNING: Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
technician.
How to reset the lamp runtime in the iQ/iD ?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pul
ldowntheLamp menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset (image 10-10)
7. Press ENTER
A dialog box is displayed (image 10-11)
8. Use ←or →,then
umeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
Image 10-10
R5976367 BARCOIQ GRAPHICS 500 01/02/2007 93