Filter
Top Products
10. Lamp Menu
Image 10-11
WARNING: Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
technician.
How to reset the lamp runtime in the SIM5Plus?
1. Press MENU to activate the Tool bar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down th
e menu
6. Use ↑ or ↓ toselectthelamptobereset
7. Press ENTER
A dialog box is displayed (image 10-12)
8. Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
Image 10-12
WARNING: Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized
technician.
10.6 Runtime warning
What can be done ?
When the lamp has reached a certain predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime.
94
R5976367 BARCOIQ GRAPHICS 500 01/02/2007