Filter
Top Products
Getting Started
Manual Documentation Number: MES1A/MES1B-2106m PN7138-rev001
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
16
Connecting to the MES1A/B
Before configuration can occur you must set up a telnet connection
with the MES1A/B to access the Configuration Menu. You can
access the Configuration Menu using a standard telnet window, or
use the telnet implementation within the Device Installer software.
The Device Installer option provides an all-in-one user interface for
working with the MES1A/B
To connect:
3. Select the Telnet Configuration tab. The tab shows the IP
Address of the MES1A/B and the Port Number used to
communicate with it via telnet. The rest of the window is
blank.
4. Click Connect to connect to the MES1A/B. When a
connection is established the following window appears,
which contains information on the MAC address and
Software version of the MES1A/B.
Figure 12. Press Enter to go into Setup Mode
The background color of the window remains white for
five seconds, then changes to gray when it times out.
5. Press the Enter key within five seconds to go into Setup
Mode or it will time out (and you will have to click Clear
and repeat the process).
The MES1A/B Configuration Menu appears.