Filter
Top Products
Using Other Device Installer Features
Manual Documentation Number: MES1A/MES1B-2106m PN7138-rev001
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
36
Saving Device Lists
After a list of MES1A/B devices has been discovered on the network, you
can save the list, including details such as the Device Name, Group,
Comments and IP Address.
To save a Device List, On the File menu, select Save or Save As, type in a
file name of your choice and click Save.
Note: The configuration of the MES1A/B is NOT saved using this method. To
store the configuration in the MES1A/B, on the Telnet Configuration Menu, set
up the configuration, then type S at the Default settings, Save,
Quit without Save prompt. To store the configuration in a Setup
Record file see the procedure later in this chapter.
Opening Device Lists
To open an existing Device List, on the File menu, select Open. In the Open
dialog box that appears, select or type in a file name and click Open.
The MES1A/B will search for all devices listed in the Device List file and
display them in the Devices Tree. Devices not listed in the Device List file
will not be shown. To discover other devices not already on the list you must
initiate a search.
Device List Display Options
Device Installer provides several options for displaying devices in the Device
Tree and List.
Display Devices Using Icons
• On the View menu, select Device List, then select Icons.
Figure 20. Device List Icon View