Filter
Top Products
22
Press the AV button repetitively and
select the AV3 mode by two scart
models or select AV2 mode by one
scart models.
Connecting a decoder
Via SCART
Make sure the TV and decoder are both
switched off.
Plug one end of the SCART lead (not
supplied) into the back of the decoder and the
other end into the SCART1 on
the back of the TV.
Switch on the decoder and the TV.
Via PHONO lead (Model Dependant)
Make sure the TV and decoder are both
switched off.
Plug one end of the PHONO lead into the
video and audio out sockets on the back
of the decoder and plug the other end into
the video and audio in sockets on the TV.
Select TINT by using Program down
button and use the Volume up and down
buttons adjust the colour.
Please Note (Model Dependant)
You can record from one external piece of
equipment to another via the TV by
connecting the playback to SCART 1
recorder to SCART 2 selecting AV1.
You cannot watch the TV.
You can connect NTSC supported equipment
to the TV via the SCART sockets and
adjusting the colour via the PICTURE
menu.
Press the AV button on the remote
control to select AV1.
R
L
AUDIO OUT
AV1
AV2