Filter
Top Products
Information
28
Technical data
Mains voltage: 230 V, 50 Hz
Power consumption: 2 W in standby, 65 W in operation
Sound output: 2x3 W music power
Reception range: C01 ... C99, special channels S01 ... S41,
frequency band 1 ... 4
Preset channels: 100
Ambient temperature: +5 °C to +40 °C
Playback norm: PAL, 50 Hz, 625 lines
NTSC, 60 Hz, 525 lines
Disc formats: DVD R, DVD RW, CD-R, CD-RW
Media formats: DVD video, audio CD, video CD
(VCD 1.0/1.1/2.0), S-Video CD,
CD-ROM (MP3, JPEG)
The product complies with the following EU directives:
73/23/EEC directive for electrical equipment to be used within defined voltage
ranges. 89/336/EEC directive on electromagnetic compatibility.
The television set complies with the following standards: EN 60065, EN
55013, EN 55020.
Your system is a CLASS 1 LASER PRODUCT. This means that the laser is
designed in such a way as to ensure that the maximum permissible emission
value cannot be exceeded under any circumstances.
Caution:
If operating devices or methods other than those specified here are employed, it
may lead to dangerous exposure to emissions.
This device emits laser radiation. Because of the danger of eye injuries, the unit
may only be opened or serviced by trained personnel.
If settings other than those specified here are employed or OTHER PROCEDURES
are carried out, this may lead to dangerous radiation exposure.
This product contains components which are covered by certain U.S. patents or
for other reasons are considered intellectual property of the Macrovision Corporation
and other proprietors. Use of this protected technology must be approved by the
Macrovision Company and is only permissible for private presentation at home
or for other limited applications, where no special permission has been granted
by Macrovision. Reproduction or disassembly of the device is prohibited.
Manufactured with permission from Dolby Laboratories. The ”Dolby” label and the
double-D logo are trademarks of Dolby Laboratories. Confidential unpublished
material. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
During playback of DTS-coded CDs and DVDs, a high noise level is produced at
the analogue stereo outputs. In order to avoid possible damage to he audio
system, the user should take appropriate preventive measures when the stereo
outputs of the DVD player are connected to an amplification system. For DTS
Digital Surround playback, an external 5.1-channel DTS Digital Surround decoder
must be connected to the digital output (S/PDIF) of the DVD player.
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. All rights
reserved.
Service information for dealers
General instructions for laser devices