Beko F 972 SIYAH Flat Panel Television User Manual


 
19
If you have an S-Video player you can
connect it to SCART socket 2
via an adaptor from scart to S-Video/RCA
audio (not supplied).
S-Video Player
Plug a coaxial plug into the RF out socket on
the rear of the video recorder and plug the
other end into the aerial socket of the TV.
Switch on the video recorder and the TV.
If your video recorder has a test signal, switch
it on. (Refer to the video recorder user guide).
See Tuning the TV and carry out the tuning
procedure for the video recorder test signal.
Select a programme number 0 or between 55
and 99.
Press the AV button three times
to select AV2S (available by two
scart models).
Press the AV button repetitively
to select AV3S by two scart
models or AV4S by three scart
models.
Plug the S-Video plug into the S-Video
socket and the audio leads into the audio
sockets.
You can also connect it through the
S-Video socket of the TV (optional).
Via RCA lead and S-Video socket
Via aerial socket
Make sure the TV and video recorder are
both switched off.
Unplug the aerial lead from the TV and plug
it into the aerial socket on the video
recorder (if fitted).
R
L
MONO
VIDEO
R
L
MONO
VIDEO
S-Video In
R
L
AUDIO OUT
AV1
AV2
AV3
AV
AV