Filter
Top Products
9
Tuning with channel numbers
Enter the SETUP menu by pressing
the blue button.
Press the OK button to enter the
CHANNEL row.
Use the OK button to select
S for cable channels and
C for terrestrial broadcast.
Use Volume up button to select
the channel number buttons.
Enter the channel number using
the Numeric buttons.
To exit the SETUP menu press the
TV/TX button.
Automatic tuning (Autoprogram)
Enter the SETUP menu as before.
Use the Program down button to
select PROGRAM NO.
Use the Volume up/down buttons
to select the program number.
Use the Program down button to
select STORE. Press the
OKbutton
and STORED will appear on the
STORE line.
You have now stored the first
channel.
Use the Program up button to
select again SEARCH and continue
the tuning procedure until you
have tuned in all the programmes
you want or the television can
receive.
Use theProgram down button to
select AUTOPROGRAM and
the OK button. A list of
countries will appear. Select
the desired country using
Program and Volume buttons.
press
Press the Program down/up
buttons to exit the channel row.
Child lock
Childlock switches off the programme you are
watching when you select it. All other
programmes are unaffected. If you go back to
the programme with childlock on you will see
a black screen with the OSD showing
. You can lock as many programs
as you want.
Press the Volume up button to
switch the Child lock on or off.
OK
7
OK
OK
TV/TX
OK
MENU
OK
Fine tuning
Although the search and Autoprogram
will automatically try and tune to the
best reception, in areas of poor reception
a bit of fine tuning may be required.
In the SETUP menu use the
Program up/down buttons to
select FINE TUNE. Use the
Volume up and Volume down
buttons to fine tune.
When you have finished use the
Program down button to select
STORE and press the OK button.
CHANNEL
SYSTEM
FINE TUNE
SEARCH
AUTOPROGRAM
CHILD LOCK
PROGRAM NO
STORE
BACK
SETUP
S 07
BG
0
< >
OFF
P1
C/S
When you are sure the aerial is
connected properly press the OK
button. Autoprogam will start.
To cancel Autoprogram whilst it
is
working press the Menu button.