Filter
Top Products
Getting started
Remove your Television carefully
from the box. You may wish to
You can use an outdoor or indoor aerial.
However, if you use an indoor aerial the
quality of the reception may be reduced
and adjustment of the aerial may be
required when changing programs.
Please note
If you live in a poor reception area or use an
indoor aerial you may experience loss or
corruption of teletext transmissions.
Switching on
Mains power
Connect the mains plug into the mains
socket and switch on.
Connect the TV mains plug into your domestic
mains socket outlet (230 V 50 Hz AC).
Please Note
When not in use disconnect the plug
from the mains power supply.
Switching the TV on for the first time
To install your TV, please read the sections
TV controls and Tuning the television.
Press the Standby
button to switch
the TV to standby. The standby
indicator will brighter.
Please Note
Do not leave the television on standby
unattended or overnight.
Battery fitting
Insert the 2 AAA Batteries supplied into
the compartment on the rear of the remote
control, ensure you follow the polarity
diagram inside the compartment.
Press the Power button on
the front of the TV. The
standby indicator will
illuminate.
7
4
Read these instructions before use.
Aerial connection
To connect an aerial, plug the aerial lead
into the aerial socket on the rear of the
TV.
Press a Numeric button or the
Program up or Program down
button on the remote handset or
Program up or Program down
button on the front panel to
switch the TV on.
The standby indicator remains on.
The picture will appear after a
few seconds.
store the packaging for future use.
In the box
Inside your this package you should have:
¥ Television
¥ Remote control
¥ User guide
¥ AAA batteries x 2