Filter
Top Products
Operating Instructions | 6
Operating Instructions
LED Chart
Every time you push a button on the
Remote, the green lights on the Remote
and the Receiver blink, indicating that the
signal has been received correctly.
If the Remote and the Receiver are too
far apart to communicate, the light on
the Remote blinks amber (after a short
delay) instead of green when you press
a button. The light on the Receiver will
not blink.
The Remote’s battery level is
automatically checked after every button
press. If the battery level is low, the
Remote’s red light will blink, following
the green or amber blink. The low
battery should be replaced soon. The
TuneCommand will continue to function
normally until the battery is exhausted.
Green Received the signal
Green The receiver receives the signal
Red The battery life is running out
Amber Out of range
Storage Option
The TuneCommand Remote features a convenient
Mounting Port for storing the TuneCommand
Receiver when not in use—ensuring you can
always easily find it again.
P74852_F8Z024_uk.indd 6 29/9/05 4:10:33 pm