Filter
Top Products
Model AC504A & AC504A-CP
6
1.3 Features
• Eliminates the need for bulky , expensive and hard to build
multi-coaxial cables for high-resolution video extension
• Amplifies the signal for clean and crisp transmission
• Differential signaling eliminates ground loops and noise
• Handles resolutions up to 1600x1200 at any refresh rate
• Rugged, Reliable, Compact size
• Only one end requires power in most applications. Power
supply can be connected at the sending or the receiving end,
whichever convenient.
• Drive standard CAT5 cables to 500 feet (for VGA and
Component video versions) or to 1200 feet for (Composite
Video and Stereo Audio version)
• Perfect for Remote Monitoring, Video Staging, Conference
Rooms, Classrooms, Home-Theatre Applications and more
2. Installation
1. Connect the VGA in (HD-15) connector of the AC504A
Transmitter to the computer's or other equipment’s video output
port using the supplied cable (see figure 2.1).
2. Connect the included power adapter to the power connector on
either of the transmitter or the receiver (for more information,
please see the recommendations immediately following this
paragraph). Be sure to insert the power connector fully. Check the
red light next to the RJ45 connector to verify unit’s power. When
the two units are connected Via CAT5 cable, the LED’s at both
ends should be lit.
VGA
CAT-5
Remote Monitor
Figure 2.1
VGA
Sender
Receiver