Filter
Top Products
Page 13
724-746-5500 | blackbox.com
Chapter 3: Remote Control Functions
Table 3-1 (Continued). Remote Control Components.
Number Component Description
5 Color bar pattern ON/OFF Press the button to show color bar pat-
tern on the screen. Press again to close
the color bar.
6 Image freeze ON/OFF Press the button to freeze an image.
Press again to un-freeze the image.
7 Output format Press the button to select the desired
output format
8 Under/overscan Press the button to choose an underscan
image or an overscan image.
9 9-blocks selection (Zoom) Under zoom mode, press one of the
buttons to select its corresponding sub-
area, which is
1
⁄9 of the full screen
10 Zoom ON/OFF Press the button to zoom in a picture.
Press again to zoom out.
11 Horizontal/vertical Adjust the size or position of an image
adjust arrows when it is under Zoom, Position/Pan, or
Size/EXP mode.
12 Default Press the button to revert the following
parameters to factory preset value:
Zoom, Position, Size, Picture Adjust
13 Pos/Pan When a picture is in underscan mode,
press the button to adjust the position.
When a picture is in overscan mode,
press the button to adjust the pan.
14 System Reset Press the button to revert all system
parameters back to factory preset value.
The system parameters default settings
are: Overscan, NTSC output, full aspect,
video settings reset, position/pan/size/
expand reset