Filter
Top Products
9
Secure all cabling.
Installations on drywall must use a ¼” bolt
and drywall butterfly type anchor or superior
connection.
The EX12LED can be mounted to any flat
surface. The supplied “U” shaped mounting
bracket allows for tilt as well as rotation. If this
mounting bracket does not suit the needs of the
installation, the installer can utilize either of the
two ¼-20 camera-mount holes located in the
housing (see Figure 1-3 on page 6). The choice
of camera-type mounting brackets is left to the
installer.
Step 3.1 - Mount the “U” bracket to the chosen
mounting surface and attach the
EX12LED with the supplied
adjustment screws.
See Figure 3-1 on page 10.
Step 3.2 - Tighten the EX12LED into its
approximate viewing direction.
Proceed to Section 4.