Filter
Top Products
3
INITIAL PREPARATIONS
The EX12LED operates in either Vdc or
Vac mode. The power input supply voltages
can be 12-24VAC/DC
See Section 2, Input Power Connections –
Reference Only.
Determine the optimum location for the
Illuminator unit.
See Section 3, Mounting-Illuminator Unit.
All units have been tested prior to shipment,
but it is advisable to check the unit’s
operation before installation.
GUIDELINES
The installation and set-up of the EX12LED is
explained in Sections 3 and 4.
It is important that these steps are followed in
sequence: