Filter
Top Products
Method C: Software Control Through RS-232 or USB
Software Control Menu
1. Scan button:
Serial Port Scan:
Press Scan button, the computer will scan the all com port
and display them.
Select the RS232 serial port connected to the Matrix switch.
And set device ID 255 is for all device.
Only the same device id or 255 can get the command you send.
Press OK. Get the new status from the Matrix switch (the port
you select.)
Input &
Source indicator
Output port
Status Indicator
SPECIFICATIONS & PACKAGE CONTENTS
Model Name HSW88C v1.3
Technical HSW88C HSMR
Role of usage
8x8 true matrix
Transmitter [TX]
Receiver [RX]
HDMI compliance HDMI 1.3c
seY ecnailpmoc PCDH
Video bandwidth
[HSW88C v1.3] – Single-link 225MHz [6.75Gpbs]
0Hz6p0801 / i0801 / p027 / p084 / i084 troppus oediV
Audio support Surround sound (up to 7.1ch) or stereo digital audio
HDMI over CAT5
transmission range
Full HD (1080p) – 115ft (35m) [CAT5e] / 130ft (40m) [CAT6]
HD (720p/1080i) –165ft [CAT5e] / 180ft [CAT6]
HDMI equalization N/A 8-level digital rotary control
]kaep-ot-kaep[ stloV 2.1 langis SDMT
]LTT ,kaep-ot-kaep[ stloV 5 langis CDD
ESD protection
[1] Human body model — ±15kV [air-gap discharge] & ±8kV
[contact discharge]
[2] Core chipset — ±8kV
PCB stack-up
4-layer board [impendence control — differential 100
; single
50
]
Input
8x HDMI
1x RS-232
1xUSB
1x RJ-45 [TMDS]
1x RJ-45 [DDC]
1x IR socket for IR receiver
Output
8x RJ-45 [TMDS]
8x RJ-45 [DDC]
9x IR socket for IR blaster
1x HDMI
HDMI Input selection
Push button / IR remote control /
RS-232/USB
Push button / IR remote
control
HDMI source control
Controllable via IR pass-through from IR receiver at RX to IR blaster
at TX
IR remote control
Electro-optical characteristics:
= 25° / Carrier frequency: 38kHz
]elamef nip-91[ A epyT rotcennoc IMDH
RJ-45 connector WE/SS 8P8C with 2 LED indicators [TMDS & DDC channels]
]elamef bus-D nip-9[ 9-ED rotcennoc 232-SR
USB connector
3
]epahs erauqs[ B-epyt dradnatS
3.5mm connector
Earphone jack for IR blaster
[IR Main] IR control on all source
devices
[IR PASS-THROUGH1~8] IR control on
individual source device
Earphone jack for IR receiver
[IR RECEIVER] Receives IR commands
from remote control
DIP switch [HSW88C]
[SW1~SW8] 2-pin for EDID & audio mode
[SW Main] 4-pin for operation & firmware update