Filter
Top Products
Method A: Push button for switching input channels
Press the INPUT SELECT push button to switch the input source on the
respective output port connected to the matrix receiver in sequential
order. The selected input source will be displayed on the LED of INPUT
CHANNEL.
Method B1: IR remote control for switching input channels
Please press F1 to F6, Enter ( ) , and Exit ( ) button to enter IR control
mode and decide which input channel to be selected by pressing F1
to F6, Enter ( ) , and Exit ( ) button, and wait a few seconds for the
input channel LED display to show the number of selected input source
channel. Or you can use up ( ) and down ( ) button to enter IR control
mode and select the input channel in ascending and descending order
respectively.
Note:
> If HSMR receives the IR command, the LED will flash.
If not, try it again.
Method B2:
IR remote control for controlling the HDMI sources
Users can use the corresponding IR remote to control the HDMI
DISPLAY SIDE
Mechanical HSW88C HSMR
esac lateM erusolcnE
Model
440 x 290 x 44mm [1’5” x 11.4” x
1.7”]
85 x 90 x 25mm [3.3” x 3.5” x 1”]
Package
528 x 398 x 130mm [1’9” x 1’4” x
5.1”]
90 x 85 x 25mm [3.5” x 3.3” x 1”]
Dimensions
(L x W x H)
]”5’1 x ”01’1 x ”11[ mm024 x 055 x 082 notraC
Model 3250g [7.2 lbs] 180g [6.3oz]
Weight
Package 7.1 kg [15.6 lbs]
Mounting 1U rack-mount with ears Wall-mount with screws
Power supply AC Power 100-240V Not necessarily required
1
Power consumption 60 Watts [max]
1.5 Watt [max] (provided by
MA-5188)
Operation
temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
]noitasnednoc on[ HR %09~02 ytidimuh evitaleR
Package Contents
1x HSW88C (matrix switch)
1x IR blaster
2
2x 1U rack mounting-ear
1x IR remote controller
2
1x User Manual
8x HSMR (HDMI receiver)
8x IR receiver
16x Wall-mounting screws
1x UL AC power cord
1. The HSMR has been tested extensively and found that
it doesn’t require external power supply. If in rare situation
you find it cannot work with the HSW88C, please use any
+5V power adapter to plug in the power jack and see if it
can work. If not, please contact your technical support for
further service.
2. Additional IR remote control and IR blaster cable can be
purchased as optional accessories to control the HDMI
sources located separately.
3. USB or RS-232 control must be connected either one at a
time. Connecting both types of cables may cause
command confusion.
F1
HDMI input source #1
F2 HDMI input source #2
F3 HDMI input source #3
F4 HDMI input source #4
F5 HDMI input source #5
F6 HDMI input source #6
Enter ( ) HDMI input source #7
Exit ( ) HDMI input source #8
Up ( ) Switch source in ascending order
Down ( )
Switch source in descending
order
source