Filter
Top Products
PAGE
19
●
Channel Switch
Use the number buttons to choose the desired channel directly or press【CH+】/【CH-】
on the panel or【P+】/【P-】on the remote control to select the channel number. If a channel
number is in SKIP ON mode, the next channel will be displayed.
A maximum of 2 digits can be keyed in at one time, the number button on the remote
control is used. The symbol of “- -” on the upper-right corner represent tens and one
respectively. The range is 0～99. The first input number is for tens, if it is “1”,“1-”appears
on screen. The TV will switch to channel 1 if no additional number is keyed in within 3
seconds. Alternatively, press【OK】to switch to the desired channel after the corresponding
number is keyed in.
Note: This function is only available in TV mode
● Sleep Function
Press【SLEEP】on the remote control once to
activate the function and subsequent keying in to
select the sleep time of 0, 15, 30, 45, 60,90, 120,
150,180, 240 and 0 minutes. This is will be reflected in
the top right hand corner of the screen. After this step
is done, press 【SLEEP】to view the set sleep. See the
illustration in the right.
Sleep 30
● Indicator Light
Status Light Color Description
On/Off Off
The TV works normally/is power
off
Standby Red In Standby Mode
Timer On/Off Or Sleep Green
Timer On/Off is valid or Sleep is
on
Sleep (PC) Yellow Sleep for power-saving;
Receives signal from
the remote control
Flickering
The indicator will flicker when the
TV receives signal from the
remote control