Filter
Top Products
PAGE 14
button after two different channels are selected.
● Program
Display the current program’s channel number
● Name
Rename the program with four coloured buttons on the remote control
【Red】for Capitalized English letters
【Green】for Alphanumeric numbers from 0 to 9
【Yellow】for special characters as “#”
【Blue】Resuming “*” in unnamed mode
Use【V+】/【V-】to input and select the characters
Note: In PC signal mode, there are 2 options of Language and Child Lock in the Setup
menu. In AV/RGB/YPbPr signal mode, there are 3 options of Language, Blue Back and
Child Lock.
Ⅳ Tune
Press 【P+】/【P-】to select the Tune menu. There
are altogether 7 items to adjust: Auto Search,
Search, Band, Fine Tune, Colour System,
Sound System and Skip.
● Auto Search
In Auto Search mode
1. The TV does auto-search and stores
programs from VHF-L to UHF.
2. During search, all programs searched are automatically stored.
3. When the search is done or when all 100-program positions are occupied, or you
have pressed 【MENU】during the search process, the search will halt and the TV will
return to the Tune menu with channel 0.
● Search
In Search mode, press【V+】/【V-】so that the TV manually searches the lower or upper
program position until one program was searched and automatic storage will commence. If
the program is not needed, then press【V+】/【V-】again. After pressing 【MENU】, the TV
will exit from Search and return to the menu.
● Band
To set which band the current program belongs to.
● Fine Tune
In Fine Tune mode, press 【V+】/【V-】to until the best picture and sound is achieved. After
adjusting, the TV will auto-store the channels. Press 【MENU】to exit and return to the Tune
menu.
● Colour System
To set the colour system of the current program and use 【V+】/【V-】 to switch between
PAL, NTSC, SECAM and AUTO systems.
● Sound System
To switch between D/K,L B/G and I sound systems.
● Skip
Skipping the unwanted program can dramatically quicken program selection.