Filter
Top Products
PAGE 17
on the panel or【P+】/【P-】on the remote control to select the channel number. If a channel
number is in SKIP ON mode, the next channel will be displayed.
A maximum of 2 digits can be keyed in at one time, the number button on the remote
control is used. The symbol of “- -” on the upper-right corner represent tens and one
respectively. The range is 0～99. The first input number is for tens, if it is “1”,“1-”appears
on screen. The TV will switch to channel 1 if no additional number is keyed in within 3
seconds. Alternatively, press【OK】to switch to the desired channel after the corresponding
number is keyed in.
Note: This function is only available in TV mode
● Sleep Function
Press【SLEEP】on the remote control once to
activate the function and subsequent keying in to
select the sleep time of 0, 15, 30, 45, 60,90, 120,
150,180, 240 and 0 minutes. This is will be reflected in
the top right hand corner of the screen. After this step
is done, press 【SLEEP】 to view the set sleep. See
the illustration in the right.
● Indicator Light
Status Light Colour Description
On/Off Off The TV works normally/is power off
Standby Red In Standby Mode
Timer On/Off Or Sleep Green Timer On/Off is valid or Sleep is on
Sleep (PC) Yellow Sleep for power-saving;
Receives signal from the
remote control
Flickering
The indicator will flicker when the TV receives
signal from the remote control
Sleep 30