Filter
Top Products
PAGE 15
1. Turn Skip on, pressing【P+】/【P-】can not select this program.
2. Input the program number directly to locate the program.
Note: There is only Colour System for the Tune Menu in AV, RGB and signal sources. There
is PC Setup menu for the Tune menu in PC signal source. There is no Tune menu in YPbPr
signal source.
Ⅴ Clock
● Current Time
The current time can be set by using the
number buttons (0-9) or【V+】/【V-】.
● On Time
The function of On Time can be effective when
On Mode is on. Press the number buttons or【V+】
/【V-】to set the time.
● On Mode
When this function is on, a preset time can be
programmed to turn on the TV.
● On Prog
To enter a selected program directly after Timer On is set.
● Off Time
The function of Off Time can be effective only when Off Mode is on. Press the number
buttons (0-9) or【V+】/【V-】to adjust the time.
● Off Mode
When this function is on, a preset time can be programmed to turn on the TV.
Note: The TV can only be turned on automatically when it is in standby mode. The Clock
menu is applicable in all signal sources.
Ⅵ PC Setup
● H Position
To adjust picture position horizontally.
● V Position
To adjust picture position vertically.
● Clock
To adjust picture clock position.
● Phase
To adjust picture phase.
● Colour Temp
Four modes of Warm、Normal、Cool and User can be chosen with 【V+】/【V-】in cycle.
Only in User mode can adjustments be made to the three options: Red, Green and Blue.
● Auto Adjust
To automatically adjust the picture position, clock, phase and colour temperature to a
preset optimum value. This mode is invalid in DOS mode.
Note: The PC Setup menu is only available in the PC signal source.